How To Properly Clean The Ventilation Filter?

In order to better maintain the filtration efficiency and filtration effect of the Air Filter Material, it is definitely necessary to do a good job of cleaning the ventilation filter. Otherwise, after working for a long time, a lot of pollutants will be attached to the ventilation filter, which may cause secondary pollution or be damaged due to excessive pressure on the equipment.

The ventilation filter is made of organic synthetic fibers and Nonwoven Fabric. This organic synthetic fiber has the advantages of anti - breakage, so the ventilation filter is also very solid. The ventilation filter will be treated with stickiness during the manufacturing process. Because the adhesive penetrates into the medium, the effect of blocking the passage of particles is improved. The air outlet surface of the ventilation filter is very dense, and a layer of square mesh is added for qualitative purposes. This design structure can ensure the dust holding capacity and filtration efficiency of the Air Filter Media.

How to better clean the ventilation filter?

1. Do a good job of disassembling the ventilation filter:
The first thing to note is to do a good job of disassembling the equipment. When disassembling, many people disassemble according to some old methods, or even disassemble according to their own experience. However, the characteristics of different devices are different, and the disassembly methods are also different. You should remove the parts that need to be cleaned according to the instructions, including the ventilation filter, and then visit them in a reasonable way, and then clean them. It will not damage the equipment and various parts in the equipment.
2. Pay attention to the cleaning of ventilation filters:
In the process of cleaning, it should be noted that if the ventilation filter is not very dirty, it can be removed by gently flapping or a dust collector. If it is very dirty, it can be cleaned by washing with water. During the cleaning process, the water temperature should not be too high, and should not exceed 50 degrees Celsius. During the cleaning process, detergents such as washing powder, detergent, and gasoline should not be used, but special detergents should be used. After the cleaning is completed, it should be placed in a cool place to air dry, and it should not be exposed to the sun or exposed to the sun, otherwise the ventilation filter will be easily deformed.
3. Complete the formulation of the cleaning plan
After completing the corresponding cleaning work, it will also remind everyone that a plan for completing the cleaning work is formulated. Everyone needs to know that cleaning and ventilation, filters need to be planned, such as the frequency of cleaning, the places that need to be cleaned, the specific matters that need to be paid attention to in the cleaning process, etc. Paying attention to these problems can make the later cleaning work more successful.
Pay attention to the above aspects when cleaning the ventilation filter, which can make the cleaning work easier and the effect is better.